Tesla’s lost Inventions

updated 11-23-2013

A few of Tesla’s lost Inventions

by George Trinkaus

Tesla was famous at the turn of the century for inventing the alternating current system still in use today. But his later inventions, documented in some 30 U.S. patents between 1890 and 1921, have never been utilized despite their obvious potential for advancing in fundamental ways the technology of modern civilization. Among these lost inventions: the tesla-coil electric energy magnifier, high-frequency lighting systems, the magnifying transmitter, wireless power, and the free-energy receiver.

Except that I have built a tesla coil, I have no special direct knowledge of Tesla. I never knew the man. I am not his “channel.” This work is, simply one person’s distillation of the existing Tesla literature. Particularly, this book is derived from Tesla’s patents. I have also drawn upon his published notes and lectures, his magazine articles, as well as biographies and other secondary sources. But most of my energy has gone into translating into informal English the techno-legalese of the patents. Tesla was eloquent in English (and several other languages as well). This shows in his patents, and I quote him extensively. But Tesla’s patents, like all patents, make tough reading, because they are not written for the curious but are defensive, legalistic exercises designed to protect the inventor’s interests.

Like many of us, I have been fascinated with electricity since my youth. I was a pre-teen basement experimenter and a novice-class ham. I read many of the conventional books on the subject My liberal arts college offered just one course in electronics; I took it. Out in the corporate world, as an editor of textbooks, I presided over the publication of a series of basic electronics books for the schools. But, now, I confess: I never really understood how electricity works until I read Tesla. I had to deschool myself to write this book.


Tesla’s Flying Machine

“To a Westinghouse manager, Tesla wrote ‘You should not be at all surprised, if some day you see me fly from New York to Colorado Springs in a contrivance which will resemble a gas stove and weigh as much. … and could, if necessary enter and depart through a window.'”


Spark-Gap Oscillator and Capacitor

Tesla was central in establishing the 60 cycle a.c. power system still in use today. Yet he suspected that the more striking phenomena resided in the higher frequencies of electric vibration. To reach these heights, he first tried dynamos spun at higher speeds and having a greater number of poles than any that had existed before. One having as an armature a flat, radially grooved copper disk achieved 30,000 cycles, but Tesla wanted to go into the millions of cycles.

It occurred to him that this vibratory capability was to be found in the capacitor. With a capacitor circuit, the spark-gap oscillator, he did indeed achieve the higher frequencies, and he did so by nonmechanical means. The circuit was promising enough for him to patent it as “A Method of and Apparatus for Electrical Conversion and Distribution,” for Tesla saw in it the possibility of a whole new system of electric lighting by means of high frequencies. Though it was quickly succeeded by the tesla coil and is not numbered among the more famous of the lost inventions, the spark-gap oscillator is pivotal for Tesla as the invention that launched him into his career in high frequencies.

The capacitor

There are only a few basic building blocks of electrical circuitry. The capacitor is one of them. Tesla didn’t invent it, it had been around for some time, arguably for millennia, but he did improve upon it in three of his patents. Also called condenser, the common capacitor is just a sandwich of conductive and nonconductive layers that serves the purpose of storing electrical charge. The simplest capacitor has just two conductive sheets separated by a single sheet of insulation. In the capacitor shown, the conductive elements are two metal plates. The insulation between them is oil. In the official vocabulary, the plates are indeed called “plates” and the insulative layer (oil, glass, mica, or whatever) is called the “dielectric.” Connect the two terminals of a capacitor into a circuit where there is plus-minus electrical potential, and charge builds on the plates, positive on one, negative on the other. Let this charge build for a while, then connect the two plates through some resistance, a coil, say, and the capacitor discharges. Very suddenly. Tesla said that “the explosion of dynamite is only the breath of a consumptive compared with its discharge.” He went on to say that the capacitor is “the means of producing the strongest current, the highest electrical pressure, the greatest commotion in the medium.” The capacitor’s discharge is not necessarily a single event. If it discharges into a suitable resistance, there is a rush of current outward, then back again, as if it were bouncing off the resistance, then out, and back and so forth until it peters out. The discharge is oscillatory, a vibration. The vibration can be sustained by recharging the capacitor at appropriate intervals. When Tesla talks of the capacitor’s discharge causing “commotion in the medium,” he means a vibration or mix of vibrations. The character of this vibration is determined in part by the capacity of the capacitor, that is, how much charge it will hold. This is a function of it size, the distance between plates, and the composition of the dielectric. Upon discharge there would be, typically, a fundamental vibration, some harmonics, and perhaps other commotion, maybe musical, maybe not. Additional circuitry can tame the vibration to a “pure” tone.

the “medium”

When Tesla speaks of “commotion in the medium,” what is the “medium?” In Tesla’s time it was an article of faith that there existed a unified field that permeated all being called the “ether” (or aether). The ether as the electric medium still is an article of faith in some circles, but in official science its existence is presumed to have been disproved in the laboratory. Nevertheless, this conviction about an ether ran very deep, not only among scientists but among all thinkers, until only about forty-some years ago when particle theory, E=MC^2, and, finally Hiroshima firmly established the new faith. Tesla said the electron did not exist. The materialistic concept of these little particles running through conductors is alien to Tesla electric theory.

Although the ether [Dark Energy?] is intangible, it is assumed to have elastic properties, so that Tesla can say “a circuit with a large capacity behaves as a slack spring, whereas one with a small capacity acts as a stiff spring vibrating more vigorously.” This elastic character of the ether, which you experience palpably when you play with a pair of magnets, is due to the medium’s lust for equilibrium. Distorted by electrical charge (or by magnetism or by the gravity of a material body), the ether seeks to restore a perfect balance between the polarities of positive-negative, plus-minus, yang-ying.

Voltage is the measure of ether strain or imbalance, called potential difference, or just potential. Balance is not restored from this strained condition in one swing-back. As we have seen with the capacitor, the disturbed electric medium, like a plucked guitar string, over-swings the center line of equilibrium to one side, then to the other, again and again, and this we know as vibration. In this way of looking at nature, vibration is energy, energy is vibration. So you could say that the commotion in the medium caused by the capacitors discharge is energy itself. Thus, you can speak of the capacitor as an energy magnifier. Even though a feeble potential may charge it, the sudden blast of the capacitor’s release plucks the medium mightily. The capacitor is common in modern circuitry, but Tesla used it with much greater emphasis on its capability as an energy magnifier and on a scale almost unheard of today. It’s difficult to find commercial capacitors that meet Tesla specifications. Builders of tesla coils and other high-voltage devices usually must construct their own capacitors. Fortunately, this can be done using readily available materials.

The Spark Gap

A simple way to discharge a capacitor is through a spark gap. The spark-gap oscillator is just a capacitor firing into a circuit load (lamps or whatever) through the spark gap. The opening between the spark-gap electrodes determines when the capacitor will fire. This setting is one determinant of the frequency of the circuit. The others are capacity and, the reactance, or bounce characteristics, of the load. The potential needed to bridge the gap is in the tens of thousands of volts. It takes a potential of about 20,000 volts to break down the resistance of just a quarter of an inch of air. The gap doesn’t necessarily have to be air. Tesla has referred to a gap consisting of a “film of insulation.” A spark gap is a switching device, a semiconductor in fact. But the spark gap is problematic, particularly the common two-electrode air-gap version. Heating and ionizing of the air cause irregularities in conduction and premature firing. This arcing must be quenched. It can be to a great degree by using a series of small gaps instead of one larger one, or by using a rotary gap. Tesla also emersed the gap in flowing oil, used an air blow-out, and even found that a magnetic field helps to quench. For the gap Tesla substituted high-speed rotary switches which he called “circuit controllers.” One has a rotor that dips into a pool of mercury, and another uses mercury jets to make contact. You can operate a spark gap without a capacitor by connecting it directly to a source of sufficient voltage. This is, of course, how our automotive spark plugs work, directly off the coil. (The capacitor in that circuit is used to juice the ignition coil primary.) The auto distributor, incidentally, is a rotary gap, pure Tesla. Early radio amateurs used spark-gap oscillators as transmitters. The capacitor was, more often than not, left out of the circuit, but with it the transmitter could create a greater “commotion in the medium.”

3. Tesla Coil

Tesla’s best-known invention takes the spark-gap oscillator and uses it to vibrate vigorously a coil consisting of few turns of heavy conductor. Inside of this primary coil sits another secondary coil with hundreds of turns of slender wire. In the tesla coil there is no iron core as in the conventional step-up transformer, and this air-core transformer differs radically in other ways. Recounting the birth of this invention, Tesla wrote, “Each time the condenser was discharged the current would quiver in the primary wire and induce corresponding oscillations in the secondary. Thus, a transformer or induction coil on new principles was evolved. Electrical effects of any desired character and of intensities undreamed of before are now easily producible by a perfected apparatus of this kind.” Elsewhere Tesla wrote, “There is practically no limit to the power of an oscillator.” The conventional step-up transformer (short primary winding, long secondary on an iron core) boosts voltage at the expense of amperage. This is not true of Tesla’s transformer. There is a real gain in power. Writing of the powerful coils he experimented with at his Colorado Springs lab, coils with outputs in excess of 12 million volts, Tesla wrote, “It was a revelation to myself to find out that … a single powerful streamer breaking out from a well insulated terminal may easily convey a current of several hundred amperes! The general impression is that the current in such a streamer is small.”

how it works

A tesla-coil secondary has its own particular electrical character determined in part by the length of that slender coiled wire. Like a guitar string of a particular length, it wants to vibrate at a particular frequency. The secondary is inductively plucked by the primary coil. The primary circuit consists of a pulsating high-voltage source (a generator or conventional step-up transformer), a capacitor, a spark gap, and the primary coil itself. This circuit must be designed so that it vibrates at a frequency compatible with the frequency at which the secondary wants to vibrate. The primary circuit’s frequency is determined by the frequency and voltage of the source, the capacity of the capacitor, the setting of the spark gap, and the character of the primary coil, determined in part by the length of its winding. Now when all these primary-circuit components are tuned to work in harmony with each other, and the circuit’s resulting frequency is right for plucking the secondary in a compatible rhythmic manner, the secondary becomes at its terminal end maximally excited and develops huge electrical potentials, which if not put to work, boil off as a corona of bluish light or as sparks and streamers that jump to nearby conductors with crackling reports. Unlike the conventional iron-core step-up transformer, whose core has the effect of damping vibrations, the secondary of the Tesla transformer is relatively free to swing unchecked. The pulsing from the primary coil have the effect of pushing a child in a swing. If it’s done in a rhythmic manner at just the right moment at the end of a cycle, the swing will oscillate up to great heights. Similarly, with the right timing, the electrical vibration of the secondary can be made to swing up to tremendous amplitudes, voltages in the millions. This is the power of resonance.

a new power system

Tesla invented his resonant transformer. as the tesla coil is sometimes called, to power a new type of high-frequency lighting system, as his 1891 patent drawing shows. This was the first tesla coil patent. There followed a series of other patents developing the device. All of these are for bipolar coils: both ends of the secondary are connected to the working circuit (usually lamps), as opposed to the monopolar format favored by today’s basement builders in which the top is connected to a ball or other terminal capacitor, the bottom to ground. The monopolar format emerges later in patents for radio and wireless power, including Tesla’s magnifying transmitter. The 1896 patent drawing shows an evolved bipolar coil using tandem chokes to store energy for sudden release into the capacitor, enabling the device to be powered by relatively modest inputs. Chokes are coils wound on iron cores. They store energy as magnetism. When the charging current is interrupted, the magnetic field collapses inducing current in the coils which rushes in to charge the capacitors.

superconductive

Alternating currents can be sent over long distances with relatively low losses. This is why Tesla’s early 60-cycle system triumphed over Edison’s direct current. The high-frequency, high-potential output of a tesla coil can travel over relatively light conductors for vastly greater distances than conventional 60-cycle a.c. Losses occur to some degree from coronal discharge but hardly at all from ohmic resistance. This type of current also renders conductive materials that are normally nonconductive, rarefied gases, for example. You might say these currents make a medium “super-conductive.” Although super-magnetism is not in the picture because high-frequency vibrations would be severely damped by an electromagnet’s iron core, it is revealing to reflect upon the unexploited superconductivity of Tesla energy these days when science is congratulating itself on new advances in the field. Prior to recent breakthroughs, superconductivity and supermagnetism were low-temperature (cryogenic) phenomena, occurring when circuits were cooled down to near absolute zero. The new superconductivity at less drastically reduced temperatures developed out of the cryogenic work of the last twenty years, and this may be in debt to Tesla, who patented a similar idea way back in 1901. Tesla’s patent obsenes [observes?] that the deep cooling of conductors with agents like liquid air “results in an extraordinary magnification of the oscillation in the resonating circuit.” Imagine the performance of a supercooled tesla coil.

no electrocution

Since we tend to associate high voltage with possibly fatal electric shock it may be puzzling to learn that the output of a well-tuned tesla coil, though in the millions of volts, is harmless. This is customarily thought to be because the amperage is low (it’s not) or it’s explained in terms of something called the “skin effect,” which means that the current travels over you instead of through. But the real reason is a matter of human frequency response. Just as your ears cannot respond to vibrations over about 30,000 cycles, or the eyes to light vibrations at or above ultra violet, your nervous system cannot be shocked by frequencies over about 2,000 cycles.

electrotherapy

Now that you know it’s harmless, would you believe these currents are even good for you? Fact is that a whole branch of medicine was founded on the healing effects of certain tesla-coil frequencies. Tesla understood the therapeutic value of high-frequency vibrations. He never patented in the area but did announce his findings to the medical community, and a number of devices were patented and marketed by others. Patients, by focusing certain frequencies on afflicted areas, or, in some cases, just sitting in the vicinity of vibrations from a device like the Lakhovsky Multiwave Oscillator, which produced a blend of specific frequencies, were said to have experienced relief from rheumatism and other painful conditions. It was even considered a cure for certain types of paralysis. Such radiations increase the supply of blood to the area with a warming effect (diathermy). They enhance the oxygenation and nutritive value of the blood, increase various secretions, and accelerate the elimination of waste products in the blood. All this promotes healing. Electrotherapists even spoke of ” broadcasting vitamins” to the body. Reversals of cancer tumor growths have been documented. Lakhovsky predicated that “science will discover, some day, not only the nature of microbes by the radiation they produce, but also a method of killing disease within the body by radiations.”

Electrotherapy devices were sold directly to the public via ads in popular magazines and in the Sears catalogs. Self-treatment was widespread. This easy access to treatment of all sorts of conditions led to the eventual suppression of the technology by the medical establishment. Electrotherapy, however, is making a big comeback. In chiropractic and sports medicine, low-frequency a.c. and d.c. pulses are being used to kill pain and exercise muscles. High-frequency electrotherapy is coming back in alternative healing practices. There is an increasing appreciation of the electrical nature of biological functioning and that some electric vibrations in the environment are harmful while others are healing.

Reprints of Lakhovsky’s works are widely read. There is a growing conviction that cancer can be effectively treated with high-frequency therapies. In his experimenting over an eight-year period, Tesla made no fewer than 50 types of oscillating coils. He experimented with lighting and other vacuum effects, including x-rays. He also experimented with novel shapes for the normally cylindrical coils, getting satisfying results from cone shapes and flat spirals. At Colorado Springs Tesla achieved phenomenally increased outputs by using a third coil resonantly tuned to the secondary. Observing the tremendous magnification this achieved, he gave much of his attention to integrating this “extra coil,” as he called it, into an evolved outsize tesla coil called the magnifying transmitter.


4. Magnifying Transmitter I

Wireless Power

In 1893 Tesla told a meeting of the National Electric Light Association that he believed it “practical to disturb, by means of powerful machines, the electrostatic conditions of the earth, and thus transmit intelligible signals, and, perhaps, power”. He said, “It could not require a great amount of energy to produce a disturbance perceptible at a great distance, or even all over the surface of the earth.” The ultimate “powerful machine” for these tasks is Tesla’s magnifying transmitter.

how it works

An extra coil gives the resonant boost of a tesla coil secondary but has the advantage of being more independent in its movement. A secondary, being closely slaved to the primary, is inhibited somewhat by it, its oscillations slightly damped. The extra coil is able to swing more freely. “Extra coils,” writes Tesla, “enable the obtainment of practically any emf, the limits being so far remote that I would not hesitate to produce sparks of thousands of feet in this manner.” The engineering challenge of the magnifying transmitter, then, becomes one of containing and properly radiating its “immense electrical activities, measured in the tens and even hundreds of thousands of horsepower,” as Tesla put it.

Containment and effective radiation of this power is the whole point of the design shown, for which Tesla applied for patent in 1902. The heavy primary is wound on top of the secondary at the base of the tower. The extra coil extends upward through a hooded connection to a conductive cylinder. The antenna is a toroid, a donut-shaped geometry that allows for a maximum of surface area with a comparative minimum of electrical capacity. Since this is a high-frequency device, a relatively low capacity is desirable. To increase the area of the radiating surface, the outside of the toroid is covered with half-spherical metal plates. A subtlety of the design is that the conductive cylinder is of larger radius than the radius of curvature of these plates, since a tighter curve would allow escape of energy.

The cylinder is polished to minimize losses through irregularities in the surface. At the center of the top surface sits a pointy plate that serves as a safety valve for overloads so “the powerful discharge may dart out there and lose itself harmlessly in the air.” Tesla advises bringing the power up slowly and carefully so pressure does not build at some point below the antenna, in which case “a ball of fire might break out and destroy the support or anything else in the way,” an event that “may take place with inconceivable violence.” Current in the antenna could build to an incredible 4000 amperes.

a.c./d.c.

Wireless power transmission via the magnifying transmitter was the ultimate development of the inventor who had earlier brought alternating-current power to the world with his polyphase system. The predecessor of a.c. was a direct-current system developed, manufactured, and marketed chiefly by Thomas Edison. Direct current was adequate for serving small areas but was unworkable for long distance transmission. By contrast, a.c. could be transmitted for long distances over lighter wires and its voltage could be stepped up for transmission and down for consumption by means of transformers.

Tesla invented from scratch a new kind of motor (polyphase) that could utilize a.c., and he greatly evolved earlier concepts of dynamos to generate a.c. as well as transformers to step voltage up and down. Whereas Edison’s d.c. would have been suitable for a society of small, autonomous communities, the evolving system of industrial rule wanted centralized power and needed a.c.’s long distance capability to serve huge sprawling populations. George Westinghouse, an inventor (the airbrake) who, like Edison, turned industrialist (having found that to profit from an invention one must undertake manufacturing and marketing as well) saw the promise in Tesla’s polyphase inventions and formed an alliance with the young prodigy.

Westinghouse paid Tesla one million dollars and contracted to pay a royalty of one dollar per horsepower for the polyphase inventions. Later Westinghouse was forced to renege on the royalty. Together, Westinghouse and Tesla triumphed over Edison’s d.c. system and installed the first a.c. power facilities, the most notable being the hydro plant at Niagara Falls. Tesla believed in hydro power. His ultimate energy-magnifying, wireless power system would have been hydro-based. The centralized a.c. electric power system we have today was forced into existence on a colossal scale by utility magnates of that era, the most prominent being Samuel Insull, who became infamous in some circles for his massive bilking of the investing public and famous in others for hammering together the electric power complex now in place.

This complex has developed into a federally protected monopoly with greater capital wealth than any other industry in the U. S. In the order of energy sources used, Tesla’s hydro power has been left well behind the burning of fossil fuels, a process that dumps 24 million tons of pollutants into the nation’s air supply each year. Hydro power even runs way behind the nukes in kilowatt hours produced. So went another Tesla dream. Tesla was a celebrity in his polyphase heyday, but today his celebrity is as an underground cult figure known for his radically progressive energy-magnifying, free-energy, and wireless power inventions, which, of course, have no place in the established system.

power by wire


Prior to his wireless power inventions, Tesla patented in 1897 a high frequency system that transmitted power by wire. The system used previously unheard of levels of electric potential. He notes that at these voltages, conventional power would destroy the equipment, but that his system not only contains this energy but is harmless to handle while in use. This system is not a circuit in the usual sense but a single wire without return. It employs the familiar tesla-coil configurations at both sending and receiving ends. The primary circuit (power source, capacitor, spark gap) is represented in the drawing by the generator symbol. The secondary coil is a flat spiral. An advantage in this coil design is that the voltage adjacent to the primary, where arcing across could occur, is at zero and soars to high values as the coil spirals inward. The same patent also shows a cone-shaped secondary in which the primary is at the base of the cone, which is at zero potential.

wireless power

The drawing for Tesla’s wireless power patent looks like the earlier power-by-wire patent except now spherical antennas replace the transmission lines, which are dropped out of the picture almost as if they were redundant. The ball antenna is peculiarly Tesla, as is the toroid, and you wonder why nothing like them have appeared since. In this 1900 patent, wireless power is not represented as an earth-resonant system. Here Tesla talks about transmission through “elevated strata.” The patent contains much discussion of how rarified gases in the upper atmosphere became quite conductive when there is applied “many hundred thousand or millions of volts.” Balloons are suggested to send the antennas aloft. Appreciate that Tesla in this patent has invented nothing less than the principles of radio. Tesla recognizes only a quantitative difference between sending radio signals and broadcasting electric power. Both involve sending and receiving stations tuned to one another by means of tesla-coil circuits.

Tesla’s wireless power would be the ultimate centralized electric system, a capitalist dream, but for the fact that the technology is too simple. Reception of power could be achieved just by raising an antenna, planting a ground, and connecting simple tesla-coil circuitry in between. Although Tesla himself patented a couple of electric meters for high frequencies, it would be all too easy for consumers to tune in for free, just as many today bootleg pay tv signals using illicit equipment far more sophisticated. It is no wonder, then, that the electric power establishment didn’t welcome this invention. This was one problem. Another was that the established electric power system would have to be relegated to another great pile of scrap, and maybe the established system of political power as well. Tesla’s announced dream was to use hydro sources where available and through wireless power broadcast that energy around the planet, thus liberating the world from poverty. Such a scheme would not be readily embraced by powers that sustain their rule by keeping populations poor and weak.

Centralized control of energy, as well as other resources, is, of course, believed to be essential to civilized rule, at least as far as thinking on that subject has progressed in this era. Moreover, no multinational political system was in existence, or is now for that matter, that could implement a technology of such global implications. Tesla was blind to such considerations. His commitment, his overriding priority as a technological purist, was to take machine possibilities to their logical conclusions. Today, if wireless power were seriously proposed, there would no doubt be at least one political problem that would not have arisen in Tesla’s time: resistance from environmentalists. What would an environmental impact report have to say about biologic hazards? A Navy submarine communication system that uses extremely low frequency (ELF) waves, down to below 10 cycles, has been challenged by environmentalists, as have microwave and 60 cycle high-voltage transmission lines.

engineering details

Patents normally don’t give many quantitative specifics, but Tesla’s wireless power patent does give some about the big prototype power-transmission tesla coil (which was, incidentally, used to conduct a demonstration before skeptical patent examiners). A 50,000-volt transformer charged a capacitor of .004 mfd., which discharged through a rotary gap that gave 5,000 breaks per second. The eight-foot diameter primary had just one turn of stout stranded cable. The secondary was 50 turns of heavily insulated No. 8 wire wound as a flat spiral. It vibrated at 230-250,000 cycles and produced 2 to 4 million volts. This coil evolved into the huge experimental magnifying transmitter Tesla describes in his Colorado Springs notes.

Housed in a specially built lab 110 feet square, the device used a 50,000 volt Westinghouse transformer to charge a capacitor that consisted of a galvanized tub full of salt water as an electrolyte, into which he placed large glass bottles, themselves containing salt water. The salt water in the tub was one “plate” of this capacitor, the salt water inside the bottles the other “plate,” and the bottle glass the dielectric.

Various capacities were tried, incremental changes being made by connecting more or fewer bottles. A variable tuning coil of 20 turns was connected to the primary which consisted of two turns of heavy insulated cable that ran around the base of the huge fencelike wooden secondary framework. The secondary had 24 turns of No. 8 wire on a diameter of 51 feet Various extra coils were tried, the final version being 12 feet high, 8 feet in diameter, and having 100 turns of No. 8 wire. The antenna was a 30-inch conductive ball adjustable for height on a 142-foot mast. The huge transmitter could vibrate from 45 to 150 kilocycles.

Even with the big transformer, this bill of materials does not seem inaccessible to enterprising people, and the technology does not seem so abstruse, so it is no wonder that people have gotten together to build magnifying transmitters and experiment with wireless power without support from corporations or government. One such group was the People’s Power Project in central Minnesota in the late 70’s. This group, largely farmers, objected to high voltage power lines trespassing on their land and set out to build an alternative. Limited by the sketchy information then available, the project was not successful.

Another attempt, called Project Tesla, was set up in Colorado in 1989 with a 4 year budget. Toby Grotz was the President.
NOTE: Mr. Grotz organized and chaired the 1984 Tesla Centennial Symposium and the 1986 International Tesla Symposium and was President of the International Tesla Society, a not for profit corporation formed as a result the first symposium. As Project Manager for Project Tesla, Mr. Grotz aided in the design and construction of a recreation of the equipment Nikola Tesla used for wireless transmission of power experiments in 1899 in Colorado Springs.

Endowed with more precise calculations and more experienced personnel, Project Tesla tried to repeat Tesla’s wireless-power experiment and verify his theory by taking measurements at various remote locations. They constructed “a recreation of the equipment Nikola Tesla used for wireless transmission of power experiments in 1899 in Colorado Springs.” No results are known.

See the organizations proposal document: http://www.beyondweird.com/occult/prjtesla.html


earth resonance

Among the appealing features of Colorado Springs for Tesla was the region’s frequent and sensational electrical storms. For Tesla, lightning was a joyous phenomenon. Biographers report that, during storms back East, Tesla would throw open the windows of his New York lab and recline on a couch for the duration, muttering to himself ecstatically. In Colorado Springs he tuned in and tracked lightning storms using rudimentary radio receiving equipment.

He thereby determined that lightning was a vibratory phenomenon which set up standing waves bouncing within the earth at a frequency resonantly compatible with the earth’s electrical capacity. This earth-resonant frequency, he reasoned, was the ideal frequency for wireless power transmission, and he tuned his ultimate magnifying transmitter accordingly. The literature contains various reports on exactly what this frequency is. Some say 150 kilocycles, which would be at the upper range of the Colorado Springs transmitter. Others give frequencies considerably lower, 11.78 cycles, 6.8 cycles, frequencies Tesla’s transmitter may have achieved harmonically. With reinforcement from the earth resonance, the power would actually increase in the process of transmission.

In one memorable experiment with the Colorado Springs transmitter, Tesla shot from the antenna ball veritable lightning bolts of 135 feet, producing thunder heard 15 miles distant, and, in the process, pulled so many amperes that he burned out the municipal generator. In another experiment he lit up wirelessly, at a distance of 26 miles from the lab, a bank of 10,000 watts worth of incandescent bulbs.

Two years after Colorado Springs, Tesla applied for patent for the far more refined magnifying transmitter shown at the opening of this chapter, a patent that was not granted until a dozen years later. In this patent he no longer speaks of energy broadcast through the “upper strata” of the atmosphere but of a “grounded resonant circuit.” Tesla predicted that his magnifying transmitter would “prove most important and valuable to future generations,” that it would bring about an “industrial revolution” and make possible great “humanitarian achievements.” Instead, as we shall see, the magnifying transmitter became Tesla’s Waterloo.

5. Magnifying Transmitter II

Grounded Radio

With the backing of J. P. Morgan, Tesla began, soon after returning from Colorado Springs, the construction of a magnifying transmitter tower at Wardencliff, near Shoreham, Long Island. Though closely related to a wireless power propagator and intended for further experimentation in that area, the tower was built specifically as the first station in Tesla’s proposed World System of broadcasting. The system was to carry programming for the general public as well as private communications. Tesla was the first to suggest the broadcasting of news and entertainment to the public; only point-to-point signalling had been experimented with up to then. The fully realized World System was to serve as a multi-frequency wireless interconnect for all existing telephone, telegraph, and stock ticker services around the planet. Exclusivity and noninterference of priority private communications was to be assured by multiplex techniques. The giant transmitter was also to carry a universal time register, navigation beacons, and facsimile transmissions. This was in 1902. As we shall see, Tesla’s massive contribution to radio is still largely unrecognized. The Wardencliff tower’s rugged wooden structure, designed by Stanford White, stood at 187 feet. It was topped by a mushroom-like terminal 68 feet in diameter. A separate brick building at the foot housed generating and other equipment. The entire project was to cover 200 acres and include housing for 2,000 employees of the facility. Tesla estimated that the tower would “emit a wave complex of a total maximum activity of 10 million horsepower.” The top of the tower was outfitted with a platform that may have been intended to accommodate powerful ultraviolet lamps which Tesla could have used for an experimental beam system of electric power transmission that was on his mind. The tower structure and building beneath were built and partially equipped, but they never saw operation. father of radio?

As we have seen, Tesla’s earliest oscillators were dynamos, but, having determined that he could not reach the higher frequencies by this means, he went on to develop the spark gap oscillator, the tesla coil, and the magnifying transmitter. But did any of these devices become the first to be used for overseas radio transmission? No. Ironically, the first commercial overseas transmitter was a 21.8 kilocycle GE Alexanderson alternator operated by RCA, a design evolved straight out of Tesla’s early dynamos. Such was Tesla’s luck in radio. Official histories often credit Tesla with the polyphase system and either ignore his later inventions altogether or dismiss them as the work of a crackpot. But among those who have published honest research on the subject, there is one hundred percent consensus that Tesla was cheated out of his rightful place in history, particularly his status as the leading inventor of radio technology. radio simplified.

Early radio devices are fascinating and worthy of study if only because they remind us that powerful radio technologies can be so simple and accessible to anyone, the present-day microcomplexity notwithstanding. As we have seen, the earliest transmitters in wide use by amateurs were not alternators but spark-gap oscillators. To get on the air all you needed was a battery, a telegraph key, an induction coil, a spark gap, a length of wire as an antenna, and a ground. Of course, the addition of a capacitor juiced it up considerably. The very earliest experiments in radio receiving used spark gaps as receivers. When you saw an arc across the gap, this was the detection of a disturbance in the medium. This evolved into a detector called a coherer. This is just a horizontal glass tube loosely filled with metal chips (iron, nickel). It is placed in series with a battery and a telegraph sounder, and one side of the coherer goes to the antenna, the other to ground. The coherer is a switch (a semiconductor, really) that conducts when there is a disturbance of the medium. The more easily conducted radio-frequency energy triggers conduction of this almost conductive material. To get the coherer back to a nonconducting state requires a tap that can be accomplished manually or by mechanical linkage to the telegraph sounder. Tesla comes into the technology about here. He improves the coherer by putting it into continual rotation (rotating coherer) so it didn’t need a tap to reset.

tuned radio

The spark gap transmitter was indiscriminate as to the frequency of the disturbance. It put out a dirty complex of frequencies consisting of a rough fundamental determined by width of gap, together with parasitic oscillations, harmonics, splatter what-have-you. The coherer was set off by any disturbance. In Colorado Springs, Tesla used a rotating coherer to track electrical storms. The celebrated Marconi employed nothing more evolved than this crash method of signalling. So why is Marconi so famous? Because, like Edison and Westinghouse, he built up an industry around the invention and made himself famous in the course of promoting his enterprise. … [with money and fame, you can even get the government to lie and break its own laws …more ]

Marconi’s company was ultimately incorporated into RCA (now incorporated into General Electric). It owed much of its technological development to ideas lifted from the likes of Tesla. Tesla’s contribution was nothing less than selective tuning. He set forth the principle of resonantly tuned circuits in his tesla coil patent of 1896, and the principles of transmitter-receiver tuned circuits a year later in his wireless power patent. The tesla coil is a powerful and simple radio transmitter. If the primary circuit is smoothly vibrating well above the audio range, its signal can even be modulated for voice transmission by varying some circuit element. Tesla’s few published notes on modulation describe crude ways of varying spark gaps, but, conceivably, an inductance core mechanically linked to a loudspeaker transducer might modulate the signal with some fidelity. Tesla and his supporters waged a fight for recognition of Tesla as the founder of radio. The struggle was finally won in the Supreme Court, but this did not happen until shortly after Tesla’s death.

Tesla vs Hertz

Tesla was not a theoretician by calling, but he made plenty of observations on the electrical nature of the universe that put him at odds with of official theory. In fashion then (and even now) was the theory of Heinrich Hertz, an interpreter of the physics of James Maxwell. Hertz explained radio propagation as transverse waves akin to light. Tesla was convinced that radio disturbances are standing waves in the ether akin to sound. When you drop a pebble into water, the disturbances you see in the form of concentric circles are standing waves. Both Tesla and Hertz assumed the existence of an etheric medium, but differed as to its energy transmitting properties. Tesla believed that the ether was a gaslike medium, that electric propagation was very much like that of sounds in air, “alternate compressions and rarefactions of the medium,” and that Hertzian waves could only take place in a solid medium. Tesla once said that Hertz waves are “radiations” and that “no energy could be economically transmitted to a distance by any such agency.” He said, “In my system, the process is one of true conduction which can be effected at the greatest distance without appreciable loss.” When quantum physics and particle theory came into vogue, the etheric medium was dropped out of electric theory altogether, but Hertz’s theory was more compatible with the new concepts of propagation and therefore survived. By way of rubbing this in, the unit of frequency, formerly cycles per second (cps), was renamed in honor of Hertz (hz), while Tesla is remembered only by an obscure unit of magnetic flux density. It is in respect to Tesla that I have reverted to the old unit. Hertzian radio is straight-line, light-like radiations that bounce off hills and mountains. Long distance Hertzian transmissions are explained in terms of radiations bouncing off a radio reflective upper layer called the ionosphere. Tesla thought this was all nonsense and declared in 1919 that Hertzian thinking “has stifled creative effort in the wireless art and retarded it for 25 years.”
Hertzian radio is aerial. Most of us are conditioned to thinking in terms of aerial radio; “the air waves,” “on the air.”

Tesla’s radio is grounded; the lower end of the energized coil is rooted in the earth. Pure Hertzian radio has no such natural load. Tesla doesn’t speak of antennas as such; the element he places aloft is an “elevated capacity.” Tesla said radio devices “should be designed with due regard to the physical properties of this planet and the electrical conditions obtaining in same.” Grounded radio is indeed more powerful than the Hertzian aerial. This is true particularly for the frequencies Tesla was using. The higher frequencies do behave in a Hertzian manner. Yet grounding is all but a lost concept in consumer electronics. Up through the 1940’s, AM radio receivers customarily had a terminal one was encouraged to connect to a cold water pipe or other deep earth connection. Ground the chassis of any of today’s receivers, and, unless there is some kind of interference coming up through the ground (from fluorescent circuits, light dimmers, which are oscillators, or from the local tesla coil), you will usually improve signal strength and range. Among Tesla’s contributions to radio was remote control. Tesla demonstrated a radio-controlled boat before crowds at Madison Square Gardens and sent another robot craft 25 miles up the Hudson River. Grounded radio works particularly well through water. Tesla’s basic radio tuning “tank” circuit for receiving (coil plus capacitor between antenna and ground) is, all by itself, a powerful signal amplifier and a beautifully simple one. But as radio developed over the years, the tank circuit shrank in size and the result was a loss in gain. This was compensated for by the addition of stage upon stage of complex amplification circuitry. Tesla watched this development with bewilderment. Tesla knew that the most efficient long-distance radio took place in the lower frequencies, especially those close to the earth-resonant frequency. Frequencies well below the AM broadcast band were the favored ham frequencies in the early days prior to World War I. In fact, waves of 600 meters (500 kc) were considered “short” while considered “fairly long” were the waves of 1200 meters (25 kc). Like a lot of good real estate, many of these more radio-effective frequencies below the AM broadcast band have been appropriated for military use, but also for navigation beacons, weather stations, and time registers.

underground radio

The mind conditioned by Hertzian aerial radio concepts has trouble grasping the idea that signalling can take place without any above-surface antenna, totally through the ground. James Harris Rogers, taking a cue from Tesla, circa World War I, built a radio system in which both sending and receiving antennas were sunk completely into the ground or submerged in bodies of water. He found this system far more effective and far less vulnerable to interference than any aerial radio. Signal strength has been said to be 5,000 times stronger. The military is on to this, as evidenced in the Navy’s ELF and by a U. S. Air Force project underway called Ground Wave Emergency Network. GWEN is a low-frequency communications system designed for used during a nuclear war. The network will have a cross-continent series of 600-foot diameter underground copper screens connected to 300-foot towers reminiscent of Tesla’s Wardencliff. Among the advantages of the system is its invulnerability to the effects of the electric pulse sent out by nuclear blasts. Such a pulse fries at one stroke any and all solid-state electronics within its extensive range. (Strong electric vibrations from a tesla coil or magnifying transmitter have a similar effect on solid state and will scramble or disable such circuitry temporarily or even dud it permanently.) It’s revealing that for last-ditch doomsday communications, the government reverts to Tesla’s grounded radio.

6. Lighting

In 1891 Tesla said that existing methods of lighting were “very wasteful,” that “some better methods must be invented, some more perfect apparatus devised.” Tesla went and did just that, yet here we are today in a world lit predominantly by the same Edison bulb. Edison’s bulb burns with six percent efficiency, the rest going off as heat, while the high resistance filament cooks at 4,000 degrees and eventually breaks without warning. Today’s fluorescent tube, though inspired by Tesla, is no model of efficiency either. Its inner surfaces are stimulated to phosphorescence by energy-consuming filament-like cathodes that also burn out, and the lit-up tube would present a dead short to the current if it were not for the so-called “ballast transformer,” an inductance placed in the circuit to oppose and thus eat up yet more current. What sent Tesla into an exploration of high frequency phenomena was his conviction that these rapid vibrations held the key to a superior mode of lighting. The explorations were not Tesla’s first venture into lighting. His very first U. S. patent (1885) is for an improvement in the arc lamp. He used an electromagnet to feed carbons to the arc at a uniform rate to produce a steadier light (No. 335,785). Early arc lamps produced a brilliant blue-white light, good for street lighting but not for the home, and they emitted noxious fumes. Home lighting was by gas. Street arc lighting used series circuits. Edison introduced the parallel circuit, and designed his lamp for such a circuit. Edison introduced the bigscale production and sale of electric power itself on the model of gas lighting, a major industry at the time. He wanted to be first in the business and announced to the press that he had an operable bulb before he actually had a bulb that worked. When Tesla’s a.c. system was established, it was grafted on to Edison’s, greatly extending its range and efficiency. But, essentially, it was still Edison’s parallel circuit, high consumption, incandescent lighting system, and this is what we have to live with today.

a better way

Tesla patented both his spark-gap oscillator and his tesla coil specifically as power sources for a new lighting system that used currents of high frequency and high potential. Lest you get the impression that a lone genius named Tesla invented this new form of lighting out of the blue, you should know that others before him had used high frequencies to stimulate light, and others, like Sir William Crookes, had done the same with high potentials, but Tesla was the first on record to put the two together. In Jules Verne’s 1872 novel A Journey to the Center of the Earth, the narrator tells of a brilliant portable battery lamp used by the underground explorers. It was powered by a Ruhmkorf coil, a high voltage buzzer-type induction coil (step-up transformer) popular among early electrical experimenters. The Ruhmkorf coil stimulated a lamp (type unspecified but probably a gas tube) which produced “the light of an artificial day.” The lamp had such a low current draw that the battery lasted throughout the subterranean adventure. Verne evidently was drawing, at least in part, on experimental knowledge of his day for what he calls “this ingenious application of electricity to practical purposes.” Perhaps somebody should reinvent such a high potential lamp to replace today’s flashlight which seems to exist for the purpose of enriching the Eveready division of Union Carbide. Modern neon lighting is high potential at 2,000 to 15,000 volts. (Neon sign transformers are good for powering tesla coils, but a low-frequency, high voltage device: caution.) Neon, as well as its cousin, 7,500 volt “cold cathode” (filamentless) fluorescent, which is used in some industrial lighting, is as close as we get to Tesla lighting today. Circa 1900 Tesla experimented with luminous tubes bent into alphabetic characters and other shapes. Although today’s neon is simplistic Tesla, being driven by 60-cycle high-voltage transformer power alone without the benefits of high-frequency excitation, it should suggest to us the amazing efficiency of high-potential lighting, since a single 15,000-volt neon transformer drawing only 230 watts can light up a tube extending up to 120 feet. How superior is the economy of Tesla high potential, high-frequency lighting over Edison incandescent? Tesla says “certainly 20 times, if not more” light is obtained for the same expenditure of energy.

“pure light”

Tesla invented a variety of lamps, not all of which show up in his patents. He lit up solid bodies like carbon rods in vacuum bulbs, or in bulbs containing various inert gases at low pressure (rarefied). He noted that “tubes devoid of any electrodes may be used, and there is no difficulty in producing by their means light to read by.” But he noted that the effect is “considerably increased by the use of phosphorescent bodies, such as yttria, uranium glass, etc.” Here Tesla lays the foundation for fluorescent lighting. Applied to such lamps were currents at potentials ranging from a lower limit of 20,000 volts up to voltages in the millions and vibrations of 15,000 cycles per second and up. Tesla dreamed of creating what he called “pure light” or “cold light” by generating electric vibrations at frequencies that equalled those of visible light itself. Light produced by this direct and efficient means would require vibrations of 350 to 750 billion cycles, but Tesla believed such oscillations, far above those attainable by his coils, would someday be achieved. Even so, his rarefied gas-tube lamps produced a light that more closely approximated natural daylight than any other artificial source.

Tesla’s light is like the “full-spectrum” light that is coming to be recognized as far more healthful than Edison incandescent and particularly more healthful than conventional fluorescent. Full-spectrum lighting is believed by some health practitioners actually to have healing properties.

no sudden burn-out

Tesla’s gas tube lamps burn indefinitely, as do today’s neon tubes, for there is nothing within to be consumed. Tesla’s lamps that contain electrodes like carbon rods, however, do undergo some deterioration. In Tesla’s words, “a very slow destruction and gradual diminution in size always occurs, as in incandescent filaments; but there is no possibility of sudden and premature disabling which occurs in the latter by the breaking of the filament, especially when incandescent bodies are in the shape of blocks.” In vacuum lamps, the life of the bulb depends upon the degree of exhaustion, which can never be made perfect. Also, the higher the frequency applied to such a lamp the slower the deterioration. Electrodes glow at high temperatures, and this raises the problem of how to conduct energy to them since wires or other metallic elements will melt. The problem must be addressed in lamp design. For example, in the incandescent lamp shown at the opening of this chapter, the lead-in wires connect to the hot electrodes via bronze powder contained in a refractory cup. Tesla may have designed his capacitor-base bulbs to help address this same problem.

high heat

Tesla’s search for the ideal electrode is reminiscent of Edison’s search for the long-lasting filament: “The production of a small electrode capable of withstanding enormous temperatures,” said Tesla, “I regard as the greatest importance in the manufacture of light.” One of the electrodes he tried was a small “button” of carbon which he placed in a near vacuum. Tesla regarded the high incandescence of the button to be a “necessary evil.” For lighting purposes, it was the incandescence of the gas remaining in the mostly evacuated chamber that was important. But the carbon-button lamp proved to have some remarkable properties beyond its use for illumination. When the voltage was turned up, the lamp produced such tremendous heat that the carbon button rapidly vaporized. Tesla experimented extensively with this fascinating phenomenon. For the button of carbon he substituted zirconia, the most refractory substance available at the time. It fused instantly. Even rubies vaporized. Diamonds, and, to a greater degree, carborundum, endured the best, but these could also be vaporized at high potentials. Tesla worked on the problem of heating. I have read that he contributed to the development of a high-frequency induction heating. Did Tesla work on the problem of space heating? Certainly the huge current draw of conventional electric heaters which use resistive elements argues for some inventiveness in this area. Tesla did observe that the discharges from a tesla coil resembled ” flames escaping under pressure” and were indeed hot. He reflected that a similar process must take place in the ordinary flame, that this might be an electric phenomenon. He said that electric discharges might be “a possible way of producing by other than chemical means a veritable flame which would give light and heat without material consumed.” The behavior of the carbon-button lamp suggests that a new heating mode might be found in the effects of high-frequency currents in a vacuum.

lighting up the sky

Hold a fluorescent tube near a tesla coil and it will light up in your hand. This is true of any tube or bulb with vacuum or rarefied gas. A more efficient way is to ground one end of the tube and put a length of wire as a sort of antenna on the other. Better yet, put a coil of wire that resonates with the secondary in series with the tube and ground and you have the optimal wireless power arrangement. Tesla conducted many experiments with different arrangements like this, using on some occasions the widely available Edison filament incandescent, which lighted up more brilliantly than usual because of the effects of high frequencies on the bulb’s rarefied interior. Inside his New York lab Tesla strung a wire connected to a tesla coil around the perimeter of the room. Wherever he needed light he hung a gas tube in the vicinity of this high frequency conductor. Tesla had a bold fantasy whereby he would use the principle of rarefied gas luminescence to light up the sky at night. High frequency electric energy would be transmitted, perhaps by an ionizing beam of ultraviolet radiation, into the upper atmosphere, where gases are at relatively low pressure, so that this layer would behave like a luminous tube. Skylighting, he said, would reduce the need for street lighting, and facilitate the movement of ocean going vessels. The aurora borealis is an electrical phenomenon that works on this principle, the effects of cosmic eruptions such as those from the sun being the source of electric stimulation. I, for one, am grateful that this particular Tesla fantasy never materialized since it is difficult enough to see the stars with existing light pollution, and there might be undesirable biological impacts as well.

rotating “brush”

Tesla took an evacuated incandescent type lamp globe, suspended within it at dead center a conductive element, stimulated that element with high voltage currents from an induction coil, and thus created a beam-like emanation, a “brush” discharge that was so eerily sensitive to disturbances in its environs that it seemed to be endowed with an intelligent life of its own. The device works best if there is no lead-in wire. In the bulb shown, every measure has been taken to construct it so it is free from its own electrical influence. The bulb could be stimulated inductively by applying energy to metal foil wrapped around its neck. Thus excited, “an intense phosphorescence then spreads at first over the globe, but soon gives place to a white misty light,” observes Tesla. The glow then resolves into a directional “brush” or beam that will spin around the central element. So responsive is it to any electrostatic or magnetic changes in its vicinity that “the approach of an observer at a few paces from the bulb will cause the brush to fly to the opposite side.” A small, inch-wide permanent magnet “will affect it visibly at a distance of two meters, slowing down or accelerating the rotation according to how it is held relatively to the brush.” Tesla never patented the rotating brush or used it in any practical application, but he believed it could have practical applications. He saw one use in radio where the device could conceivably be adapted to being a most sensitive detector of disturbances in the medium. The rotating brush appears to be a precursor of the plasma globe toys now in fashion; these are sometimes called “Tesla globes.” Tesla’s new lighting was famous in its time. Tesla, the promoter, saw to it. He conducted demonstrations at lectures before the electric industry associations, before large audiences in rented halls, and before select groups of influential New Yorkers in his Manhattan lab. His articles about the new lighting were published in the popular scientific press and it was reported in the newspapers. Still, it did not catch on with the powers-that-be who no doubt saw in it Tesla’s perennial pile-of scrap problem. But, I wonder, would the whole electric distribution system have to be scrapped to implement the efficiencies of Tesla lighting? Conceivably, the new lighting could be run off of local oscillators at the consumer end, the old power distribution system remaining intact. This is still a possibility, as it has been for about one hundred years.

7. Transport

Tesla speculated,”Perhaps the most valuable application of wireless energy, will be the propulsion of the flying machine, which will carry no fuel and be free from any limitations of the present airplanes and dirigibles.” The possibility of electric flight intrigued Tesla, though he never did patent an electric aircraft. But he did patent an electric railway using his high-frequency, high-potential electricity in a by-wire mode, and also patented a radical aircraft that, while not electric, did have an advanced power plant: his disk turbine. Tesla’s railway and aircraft can be numbered among the lost inventions. The closest transport technology has come to putting any of Tesla into actual practice is with diesel-electric power using Tesla polyphase motors, an early and notable example of which was the ocean liner Normandie. In the field of transport Tesla is more commonly identified with antigravity flight and UFO’s. Although this identification is based upon nothing more than a few public utterances, his suggestions charge the imagination with possibilities. high-frequency railway

Tesla’s high-frequency, high-potential railway picks up its power inductively without the use of the rolling or sliding contacts used in conventional trolley or third-rail systems. A pick-up bar travels near a cable carrying the oscillating energy. This cable, which Tesla specifically invented to carry such currents, is the precursor of the grounded shielded cable used today to carry TV and other high-frequency signals. But unlike today’s cables, which carry energy only of signal strength and shield by means of a continuous grounded static screen of fine braided copper wire, Tesla’s high voltage cable uses metal pipe or screen that is broken up into short lengths, “very much shorter,” says Tesla in his patent, “than the wave lengths of the current used.” This feature reduces loss. Since the shielding must not be interrupted, the short sections are made to overlap but are insulated from one another. To further reduce loss to ground, an inductance of high ohmic resistance or a small capacity is placed in the ground line.

motor mystery

A conundrum raised by Tesla’s railway patent is that the vehicle is powered by an electric motor, but nowhere among Tesla’s inventions is to be found an electric motor that runs off of high-frequency currents. Was Tesla planning to use a lower frequency here, something under 1,000 cycles? Did he have a converter in mind that could bring the frequency down? Or did Tesla invent a high-frequency motor that never made it into patent, an invention that may be among his unpublished notes? Anyway, Tesla proceeds in many of his discussions of high-frequency power as if this problem were solved. I’ve seen references post-Tesla to the existence of such a motor. Free-energy inventor, Hermann Plauson, (next chapter) refers to high-frequency motors. These motors have magnetic cores made of very thin laminations insulated from each other, a design that would limit damping effects.

turbine aircraft

Tesla’s only patented aircraft is a vertical take-off and landing (VTOL) plane that he intended as an improvement upon the helicopter, already invented at this time (1921): “The helicopter type of flying machine, especially with large inclination angle of the propeller axis to the horizontal, at which it is generally expected to operate, is quite unsuitable for speedy aerial transport; it is incapable of proceeding horizontally along a straight line under prevailing air conditions; it is subject to dangerous plunges and oscillations … and it is almost certainly doomed to destruction in case the motive power gives out.” Advances in helicopter design may have mitigated some of these problems, but at least the last one still holds true. Tesla’s craft, which has a large wing area, is powered by two disk turbines. The engineering problem of swinging the pilot and passengers around 90 degrees after take-off is solved at least to Tesla’s satisfaction. There have been some experimental VTOL’s but nothing in production.

electric flight

Tesla’s dream electric aircraft would be powered by means of magnifying transmitters: “Aerial machines will be propelled around the earth without a stop.” Also, in 1900, he predicted a “cold coal” battery with such output that “a practical flying machine” would be possible. Such a battery also “would enormously enhance the introduction of the automobile.” Tesla fantasized a personal “aerial taxi” which could be folded into a six-foot cube, and would weigh under 250 lbs: “It can be run through the streets and put in a garage, if desired, just like an automobile.” Explaining how his earth-resonant wireless-power system could energize vehicles aloft, he said, “power can be readily supplied without ground connection, for, although the flow is confined to earth, an electromagnetic field is created in the atmosphere surrounding it.” Tesla believed such a system to be the ultimate method of man-made flight: “With an industrial plant of great capacity, sufficient power can be derived in this manner to propel any kind of aerial machine. This I have always considered the best and permanent solution to the problems of flight. No fuel of any kind will be required as the propulsion will be accomplished by light electric motors operated at great speed.”

antigravity

Tesla wrote in 1900 of an antigravity motor: “Imagine a disk of some homogeneous material turned perfectly true and arranged to turn in frictionless bearings on a horizontal shaft above the ground. Now, it is possible that we may learn how to make such a disk rotate continuously and perform work by the force of gravity.” To do so, he said, “we have only to invent a screen against this force. By such a screen we could prevent this force from acting on one-half of the disk, and rotation of the latter would follow.” Does it not follow then, that such a gravity screen could also be used to levitate a vehicle? Tesla held no patent on such a device or on any other antigravity device, and there are no published notes on experimentation in the area.

Nevertheless, Tesla inevitably pops up in the literature of antigravity and UFO’s. This may be because Tesla was a prominent exponent of a physics in which antigravity seems more feasible because gravity is better explained. A researcher-theorist of today, Thomas Bearden, allows for gravity control in the physics he calls “the new Tesla electromagnetics.” Scaler (standing) waves “in time itself can be produced electrically” and this becomes “a magic tool capable of directly affecting and altering anything that exists in time, including gravitational fields,” says Bearden. In 1931 the editor of Science & Mechanics, Hugo Gernsback reported, “It is believed by many scientists today that the force of gravitation is merely another manifestation of electromagnetic waves.” Edward Farrow, a New York inventor, reported in 1911 an antigravity effect produced by a ring of spark gaps. When the gaps were fired, the device, called a “condensing dynamo,” lost one-sixth of its weight. T. Henry Moray wrote that “Frequencies may be developed which will balance the force of gravity to a point of neutralization.” Antigravity researcher Richard Lefors Clark places the frequency of gravity’s vibrations right at “Nature’s neutral center in the radiant energy spectrum,” above radar and below infrared, at l0^12 cycles per second. (10 trillion)

8. Free-Energy Receiver

For starters, think of this as a solar-electric panel. Tesla’s invention is very different, but the closest thing to it in conventional tech-nology is in photovoltaics. One radical difference is that conventional solar-electric panels consist of a substrate coated with crystalline silicon; the latest use amorphous silicon. Conventional solar panels are expensive, and, whatever the coating, they are manufactured by esoteric processes. But Tesla’s”solar panel” is just a shiny metal plate with a transparent coating of some insulating material which today could be a spray plastic. Stick one of these antenna-like panels up in the air, the higher the better, and wire it to one side of a capacitor, the other going to a good earth ground.Now the energy from the sun is charging that capacitor. Connect across the capacitor some sort of switching device so that it can be discharged arrhythmic intervals, and you have an electric output. Tesla’s patent is telling us that it is that simple to get electric energy. The bigger the area of the insulated plate, the more energy you get. But this is more than a “solar panel” because it does not necessarily need sunshine to operate. It also produces power at night Of course, this is impossible according to official science. For this reason, you could not get a patent on such an invention today. Many an inventor has learned this the hard way. Tesla had his problems with the patent examiners, but today’s free-energy inventor has it much tougher. At the time of this writing, the U. S. Patent Office is headed by a Reagan appointee who came to the office straight from a top executive position with Phillips Petroleum. Tesla’s free-energy receiver was patented in 1901 as An Apparatus for the Utilization of Radiant Energy. The patent refers to “the sun, as well as other sources of radiant energy, like cosmic rays.” That the device works at night is explained in terms of the night-time availability of cosmic rays. Tesla also refers to the ground as “a vast reservoir of negative electricity.” Tesla was fascinated by radiant energy and its free-energy possibilities. He called the Crooke’s radiometer (a device which has vanes that spin in a vacuum when exposed to radiant energy) “a beautiful invention.” He believed that it would become possible to harness energy directly by “connecting to the very wheelwork of nature.” His free-energy receiver is as close as he ever came to such a device in his patented work. But on his 76th birthday at the ritual press conference, Tesla (who was without the financial wherewithal to patent but went on inventing in his head) announced a “cosmic-ray motor.” When asked if it was more powerful than the Crooke’s radiometer, he answered, “thousands of times more powerful.”

how it works

From the electric potential that exists between the elevated plate (plus) and the ground (minus), energy builds in the capacitor, and, after “a suitable time interval,” the accumulated energy will “manifest itself in a powerful discharge” which can do work. The capacitor, says Tesla should be “of considerable electrostatic capacity” and its dielectric made of “the best quality mica,” for it has to with stand potentials that could rupture a weaker dielectric. Tesla gives various options for the switching device. One is a rotary switch that resembles a Tesla circuit controller. Another is an electrostatic device consisting of two very light, membranous conductors suspended in a vacuum. These sense the energy build-up in the capacitor, one going positive, the other negative, and, at a certain charge level, are attracted, touch, and thus fire the capacitor. Tesla also mentions another switching device consisting of a minute air gap or weak dielectric film which breaks down suddenly when a certain potential is reached. The above is about all the technical detail you get in the patent. Although I’ve seen a few cursory references to Tesla’s invention in my sampling of the literature of free-energy, I am not aware of any attempts to verify it experimentally.

Plauson’s converter

Tesla’s invention may have helped to inspire the many other inventors who have worked in the field of free energy. At least a dozen are on record. Let’s look at one in particular. In 1921 Hermann Plauson, a German experimenter, succeeded in obtaining patents, including one in the U. S., for Conversion of Atmospheric Electric Energy. In school, every introduction to electricity touches on the phenomenon of so-called “static” (or electrostatic) electricity, and this is what Plauson means by “atmospheric.” Static electricity is built-up charge, electricity in a raw state, and it comes easy in Nature, as evidenced by lightning and the aurora borealis. If you have ever seen a frictional static machine in operation, it’s not difficult to imagine the tremendous potential in artificially produced static. A rotating disk type of static machine or the silk belt type, as in the Van de Graff generator, produces discharges like those from a tesla coil. Unfortunately, in school, the subject of static electricity is briefly touched upon and then abruptly dropped, never to be mentioned again. Electrical power sources thereafter are limited to the battery or the wall socket.

how it works

In the Plauson drawing the free energy converter on the left interfaces with a disk type static machine via special pick up “combs.” When the static collecting disk is rotated, the combs pick up the charge, one comb going positive, the other negative. The combs, in turn, charge up their respective capacitors until sufficiently high potential builds to jump the spark gap. The oscillatory discharge is induced into the transformer primary. This is high-voltage, high-frequency electric energy. The familiar spark-gap oscillator has turned charge into dynamic energy. The transformer steps down the vibrating high voltage to practical levels to power lighting, heating, and special high-frequency motors. The Plauson patent drawing to the right shows a device that works on the same principle but collects energy by means of an antenna, as does Tesla’s receiver. Since the higher the antenna the better, and the more area the better, Plauson favors big metallic helium balloons. Plauson says the safety gap, which has three times the resistance of the working gap, is absolutely necessary for collecting large quantities of charge. The capacitors across the gaps in the series safety gap allow for uniform sparking. Plauson’s device suggests that Tesla’s might be explained in terms of electrostatics. Tesla, at the press conference honoring his 77th birthday in 1933 declared that electric power was everywhere present in unlimited quantities “and could drive the world’s machinery without the need of coal, oil, gas, or any other fuels.” A reporter asked if the sudden introduction of his principle wouldn’t “upset the present economic system.” Tesla replied, “It is badly upset already.”

9. man-made earthquake

Tesla was fascinated with the power of resonance and experimented with it not only electrically but on the mechanical plane as well. In his Manhattan lab he built mechanical vibrators and tested their powers. One experiment got out of hand.

To a steel pillar Tesla attached a powerful little vibrator driven by compressed air. Leaving it there, he went about his business. Meanwhile, down the street, a violent quaking built up, shaking down plaster, bursting plumbing, cracking widows, and breaking heavy machinery off its anchorages. Tesla’s vibrator had found the resonant frequency of a deep sandy layer of subsoil beneath his building, setting up an earthquake. Soon Tesla’s own building began to quake, and, just at the moment the police burst into the lab, Tesla was seen smashing the device with a sledge hammer, the only way he could promptly stop it. In a similar experiment, on an evening walk through the city, Tesla attached a battery-powered vibrator, described as being the size of an alarm clock, to the steel framework of a building under construction and, adjusting it to a suitable frequency, set the structure into resonant vibration. The structure shook, and so did the earth under his feet. Later Tesla boasted that he could shake down the Empire State Building with such a device, and, as if this claim were not extravagant enough, he went on to state that a large-scale resonant vibration was capable of ” splitting the Earth in half.” No details of Tesla’s vibrators are available, but they probably resembled one of Tesla’s reciprocating engines (such as Patent No. 511,916). These exploited the elasticity of gases, just as his electrical vibrators, like the tesla coil, exploit the elasticity of the electric medium.

 


from www.uncletaz.com/library/scimath/tesla/teslainv.html

 


 

The New Wizard of the West

An interview with Tesla, the Modern Miracle-Worker, who is Harnessing the Rays of the Sun; has Discovered Ways of Transmitting Power without Wires and of Seeing by Telephone; has Invented a Means of Employing Electricity as a Fertiliser; and, Finally, is Able to Manufacture Artificial Daylight.

By Chauncy Montgomery M’Govern
From Pearson’s Magazine, May 1899,


[Tesla’s proposed arrangement of balloon stations for transmitting electricity without wires.]

NOT to stagger on being shown through the laboratory of Nikola Tesla requires the possession of an uncommonly sturdy mind. No person can escape a feeling of giddiness when permitted to pass into this miracle-factory and contemplate for a moment the amazing feats which this young man can accomplish by the mere turning of a hand.

Fancy yourself seated in a large, well- lighted room, with mountains of curious-looking machinery on all sides. A tall, thin young man walks up to you, and by merely snapping his fingers creates instantaneously a ball of leaping red flame, and holds it calmly in his hands. As you gaze you are surprised to see it does not burn his fingers. He lets it fall upon his clothing, on his hair, into your lap, and, finally, puts the ball of flame into a wooden box. You are amazed to see that nowhere does the flame leave the slightest trace, and you rub your eyes to make sure you are not asleep.

The odd flame having been extinguished as miraculously as it appeared, the tall, thin young man next signals to his assistants to close up all the windows. When this has been done the room is as dark as a cave. A moment later you hear the young man say in the laboured accentuation of the foreigner: ” Now, my friends, I will make for you some daylight.” Quick as a flash the whole laboratory is filled with a strange light as beautiful as that of the moon, but as strong as that of old Sol. As you glance up at the closed shutters on each window, you see that each of them is as tight as a vice, and that no rays are coming through them. Cast your eyes wherever you will you can see no trace of the source of the odd light.

Scarcely have you begun to marvel when the light goes out by a touch on a button by the young man’s hand. The room is in darkness again until the same laboured accentuation causes the reopening of all the shutters. Some animal is now brought out from a cage, it is tied to a platform, an electric current is applied to its body and in a second the animal is dead. The tall young man calls your attention to the fact that the indicator registers only one thousand volts, and the dead animal being removed, he jumps upon the platform himself, and his assistants apply the same current to the dismay of the spectators.

You feel a creeping sensation course up your back, and you see the indicator slowly mounting up to nine hundred, and then one thousand volts, and you involuntarily close your eyes, expecting the young man to fall dead before you the very next minute. But he does not budge. Quickly the indicator goes up, up, up, until presently it shows that ten thousand volts, then two million volts of electricity are pouring through the frame of the tall young man, who does not move a muscle.

[Nikola Tesla holding in his hands balls of flame.]

At a sign, the current is stopped, the room is again made dark as night, and presently the visitor sees the sharply-defined black silhouette of the young man, with a beautiful halo of electricity in the background, formed by myriads of tongues of electric flame which are darting out from every quarter of the tall, thin frame. The place is lighted once more, and as the young man comes up to you and shakes your hand, you twist it about in the same fashion as you have seen people do who hold the handles of a strong electric battery. The young man is literally a human electric ” live wire.”

To tell of these and a thousand other wonders that Tesla does in a trice gives only a faint conception of their effect on the visitor. To really appreciate them one must see, hear, and feel them in the flesh. It is a scientific treat of a lifetime, but it is a treat that few can enjoy, for the laboratory of Tesla is securely locked against everyone not provided with an introduction from a personal friend of the audacious wizard.

“Oh, pshaw! these are only a few play- things,” Nikola Tesla replies when the visitor puts into words the astonishment he has experienced; ” none of these amount to anything–they are of no value to the great world of science. But come over here and I will show you something that will make a big revolution in every business and home as soon as I am able to get the thing into working form,” and then he leads the way through a forest of queer-looking discs and mysterious coils of copper and steel, until the party reaches a raised wall of masonry, on which reposes a long cylinder of glass filled with water, and surrounded by a circle of large mirrors. The roof over this apparatus is of glass, and as the sun pours its rays through this, the rays strike the mirrors and are reflected again towards the glass cylinder, magnifying glasses intensifying the heat of the rays before they strike the cylinder.

[Nikola Tesla] “This is the experimental model of the apparatus with which I hope some day to so harness the rays of the sun that that heavenly body will operate every machine in our factories, propel every train and carriage in our streets, and do all the cooking in our homes, as well as furnish all the light that man may need by night as well as by day. It will, in short, replace all wood and coal as a producer of motive power and heat and electric lighting

The plan of Nikola Tesla to harness the rays of the sun to do man’s bidding is probably the boldest engineering feat that he or anyone else has ever attempted. Though the idea is so great, its principle is so simple that a schoolboy can readily comprehend it. It consists of concentrating the heat of the sun on one spot (the glass cylinder) by the series of complicated mirrors and magnifying glasses until the resulting heat is something terrific.

This manufactured heat is directed upon the cylinder filled with water. This water is chemically prepared so that in a short time the water has evaporated into steam and has passed from the cylinder through a pipe and into another chamber, In the latter place this sun-made steam is made to operate a steam-engine of ordinary construction, the horse-power of which will be determined by the size of the apparatus by which the sun generates steam in that spot. This steam-engine is used to generate electricity. And this electricity can be either used at once or else stored up in storage batteries to be used on days when there is no sunlight.

It will be seen that the object of this plan of Tesla is. to do away with coal, wood, or other fuel, in the manufacture of steam. The remainder of his invention calls for the use of this sun-made steam-pressure, as steam-pressure made from coal is at present in use, throughout the world. The advantage of this Tesla invention is that the cost of manufacturing steam to generate electricity, which would propel say one hundred tram cars, would be infinitely smaller than the cost of the coal required to produce the power to do the same work. The cost of manufacturing the electricity to operate these one hundred tram cars by the Tesla plan, when once the sun station has been completed, would only be a sufficient amount to pay the salaries of a few engineers in charge of the sun-station.

“In this way electricity will be so cheapened,” says Mr. Tesla, ” that it will be possible for the poorest factory-owner to use it as a power at a smaller cost than steam. Electricity will in this way supplant steam as a motive power on all railways and — in the shape of storage batteries — on all water vessels. And the humblest citizen will profit by the new system of producing electricity; for he can have it in his home to do all his cooking and lighting and heating. and it will be even cheaper for him than coal, wood, or petroleum.”

It is, of course, not the intention of Mr. Tesla that one sun-station will provide all the electricity for the whole world. His scheme is that in every city and town the local authorities shall build one or more of these sun-stations by public taxation for the use of the whole population, just as these cities now have waterworks and gas plants. Each factory and home will then get its supply of electricity from the nearest sun-station by ordinary electric wires.

Any person can appreciate the big boon that Tesla will confer on humanity by the early completion of this master task. Among other things it will solve a question that has been occupying the minds of scientific men for a long time, viz: As the supply of coal in the earth will be exhausted in about: thousand years, what are we going to do for fuel? ” It was when Tesla first thought about the question that he turned his mind to the invention of some form of making power that would not depend upon coal. The plan to harness the sun’s rays is the result.

Quite independent of his scheme to harness old Sol, but yet capable of cooperation with it, is Tesla’s invention to transmit electrical power without the use of wires, This consists of a means of generating electricity in one spot, where it can be done with little cost, and transmitting the electricity to some other spot where it is impossible to generate electricity except at a big outlay of money.

Of course, it is now possible to transmit electrical power from one place to another by the use of electrical cables, but the cost of these transmitting cables is nearly as great as would be the cost of generating the electricity itself in the locality to which it is desired to transmit it. By the use of Tesla’s invention, the atmosphere takes the place of the electrical cables in the transmission of the power, and as the use of the atmosphere would be free, the cost of the transmission ofelectricity from one city to another would be merely nominal.

To make the atmosphere take the part of the costly cables, Tesla’s plan is to erect large power stations at every spot where a great waterfall like Niagara, for instance, makes the cost of generating electricity only trifling when the apparatus has once been constructed.

Above each of the stations Tesla wants to build a high tower, over which will be suspended a large balloon. As the electricity is generated in the station below it is conveyed by cables to the tower, and thence to the balloon, where the electricity is set free into the atmosphere. As the atmosphere at this height is much rarefied, and as Tesla has demonstrated rarefied atmosphere to be a good conductor of electricity, the electricity which is thus set free will be carried on by the atmosphere to any indefinite distance.

The second part of the Tesla plan for transmitting electrical power without wires calls for the erection of receiving stations wherever desired. These will act as sort of receivers and storage houses for the electricity set free into the atmosphcre at the generating station miles away. Over each of the receiving stations will be put up a tower and a balloon, which will be equipped with the apparatus necessary to absorb the free electricity in the atmosphere and send it to the receiving station below, from which it can be sent out on wires to light the surrounding country and drive all the machinery of that particular district.

It will be observed that in this scheme Tesla depends on getting his electricity through the agency of the waterfalls, while in the previous scheme he depends upon the agency of the sun for the same purpose. but the inventor is far from believing that the two schemes will conflict. He believes that when both inventions come into popular use they will work together for the common good of man. “The agency of waterfalls to generate electricity could be used when that agency is most convenient in view of natural conditions,” says Tesla, ” and the agency of the sun could be used in all other cases. But my scheme of transmitting electrical energy without wires can be applied with equally good results to both systems.”

Of all the great inventions which Tesla has well on the way towards that point where they can be given to the world for every-day use, his wireless telegraphy invention is the furthest advanced, All that is necessary now is the formation of a company to put up the public station. The principle of this invention is almost too well known now to bear extended explanation. Briefly described, it consists of constructing an apparatus to stir up the electric currents in the earth in such a way that their disturbance will be felt on a second apparatus fitted up in a different part of the world. Different disturbances of the electric currents produce correspondingly different impressions on the second apparatus –the receiver–and in this way an intelligible code is readily arranged.

For the benefit of non-scientific people the great inventor has described for me his wire-less telegraphy invention in the following words:

“Imagine you have on a table before you an immense rubber bag snugly filled with water. I take a rubber tube with a piston-rod in it and insert the tube into the rubber bag. When I press on the piston-rod I compress the water in the bag so that it expands the bag.

“When I withdraw the piston,” continued Tesla, ” the bag will shrink just so much as there is water drawn up into my tube; and now if I put a second tube with a piston-rod into the bag at the other end, at every pressure of the first piston-rod the effect will be felt and measured in the second tube. Now if a certain action of one piston-rod indicates a certain word or a certain sentence, if you watch the other piston-rod carefully you may easily read it. This is exactly what takes place in wireless telegraphy,” concluded Tesla; ” let the rubber bag stand for the earth, the water for the electric currents in the earth, and the two tubes and piston-rods for a sending oscillator and receiving oscillator. One sort of disturbance by one oscillator means a certain sentence, and when this particular disturbance is recorded on the second oscillator the operator there knows exactly how to interpret it.”

The “oscillators ” to which the inventor refers are huge discs on which are insulated hundreds of coils of copper wire whose ends connect with the centre of the disc, where there is a huge round copper ball. They are really the only apparatus required for wireless telegraphy. To operate them Tesla simply turns the transmitting oscillator face downwards, and turns on a current which causes immense tongues of visible electric flashes to leap from the ball into the ground. The receiving oscillator has a delicate contrivance which throbs with each disturbance of the earth’s electric currents and records them on a specially contrived apparatus.

Not the least fascinating of Tesla’s numerous inventions is one to which he has given the name of ” visual telegraphy.” With this apparatus one person has only to look into the receiver of an ordinary telephone in one city, and, while talking to a friend a thousand miles away, he can watch the expression on the other’s face, criticise the cut of his new suit of clothing, or advise him what to do for that tired look about the eyes. In this invention the experimental apparatus has proved thoroughly successful. The principle of this invention is that just as much as sound-waves make an impression on the immediate atmosphere, so do light waves make their impression.

[Nikola Tesla’s wireless telegraphy apparatus.]
“Now, as sound waves of the human voice are transmitted miles and miles by the present telephone after their impression is made on the telephone transmitter,” says Mr. Tesla, ” just so my experiments have demonstrated that the light waves of the human body can be transmitted by a different sort of telephone miles and miles away. All we need is the invention of a new transmitter. As the impressions of light waves are so many times more delicate than the impressions of sound waves, it follows that to transmit the impression of the human face, for instance, we require a transmitter many times more delicate. Now, selenium being an extremely sensitive substance, I have utilised this material in the construction of the transmitter which I have just described, and I have found it to be perfectly satisfactory.”

To make our homes, our offices, and the streets at midnight as light as day, is another of the great tasks which Mr. Tesla set out for himself many years ago. His hope was to invent a new kind of electric light which would have the strong, steady glow of sunlight.

That Tesla has succeeded in his dream to make artificial daylight there can be no doubt. To every visitor of his laboratory he shows numerous balls of glass of different sizes which look like miniature suns. The glass balls are perfectly empty, there are no wires in them, nor are there any wires on the outside of them. They do not burn the fingers when they are touched. The light does not hurt the eyes as sunlight and ordinary electric light do.

By the time this article is published, a number of the leading New York and Chicago photographers will have their studios supplied with the new artificial daylight.


[The hand of Nikola Tesla, taken by his wonderful artificial daylight, just perfected. This is the first photograph made by the light of the future]

“The reason I have chosen to introduce the new daylight to the photographers first,” says the inventor, ” is that I believe them to be the severest critics, and most hard to please in the matter of light. If it succeeds with them, a new light will succeed everywhere.”

Not the least ingenious of Tesla’s great schemes is his invention to fertilise impoverished land by electricity. When Tesla has a company formed to put this invention on the market it will no longer be necessary for the farmer to spend half his year’s receipts in purchasing fertilisers. He has only to buy an electric fertiliscr of his own, which he can secure for a trifle at the nearest town.

Dumping a few loads of loose earth into the fertiliser, it comes out at the other end, ready to be spread over the surface of the impoverished ground, where it will insure for the Eollowing season the luxurious crop of the virgin soil.

The explanation which Mr. Tesla gives of just why so simple a piece of work should be productive of such wonderful results is not difficult to comprehend. ” Everyone knows,” says he, ” that the constituent of a fertiliser which makes the ground productive is its nitrogen. Everybody knows also that nitrogen forms four-fifths of the volume of the atmosphere above that piece of unfertile land. This being the case it occurred to me: ‘Where is the sense in the farmer buying expensive nitrogen when he has it free of cost at his own door? All the agriculturist needs is some method by which he can separate some of this nitrogen from the atmosphere above the ground and place it on the surface.’ And it was to discover this means that I set to work.”

As far as the non-technical eye can perceive, the working model of the electric fertiliser consists of nothing but an upright copper cylinder with a removable top, with a spiral coil of wire running throughout the length of the cylinder. Through the bottom of the cylinder are two wires, which connect with a specially constructed dynamo. A quantity of loose earth, treated by a secret chemical preparation in liquid form, is shovelled into the cylinder, an electric current is passed through the confined atmosphere; the oxygen and hydrogen are thus expelled, and the nitrogen which remains is absorbed into the loose earth. There is thus produced as strong a fertiliser for a nominal price at home as it is possible to purchase at a large cost miles and miles away.

Mention is made in this paper of only those inventions of Mr. Tesla which have passed beyond the experimental stage. But there are hundreds of other promised wonders in the yet incipient stage of development in the great inventor’s miracle-factory. As I have heard one of his admirers express it, an enumeration of these ” sounds like the dream of a half-intoxicated god.” Signalling to other planets, raising of certain of the dead by electricity, ending all wars by a terrible machine — these are a few suggestions selected at random.

Nikola Tesla is a young man yet, and on this account many of his promises have been looked upon by older scientists as but fanciful dreams of a youthful mind. He has scarcely ever made any invention whichthe scientific world has accepted as possible on the first public announcement. But sooner or later the scientific wiseacres have been compelled to admit that Tesla has proven their theories to be wrong.

How these conservative scientists sneered at Tesla’s “Utopian audacity” when he first suggested that man should harness the great Niagara Falls! But they humbled their pride sufficiently to be present when the enterprise was formally completed. Again, when he announced the invention of the “Tesla coil” they set him down as “pipe-dreamer.” But a few of the brightest of them set to work seriously on the “coil” with the result that one of them — Rontgen — discovered his famous X-Rays. No one who is privileged to know Tesla personally, to have heard him explain his plans, and to have been shown through his unique workshop, has the slightest doubt that every one of his promises will be fulfilled in an equally successful way.

see www.homepage.ntlworld.com/forgottenfutures/tesla/tesla.htm

 


 

UNITED STATES PATENT OFFICE


NIKOLA TESLA, OF SMILJAN, LIKA, AUSTRIA-HUNGARY.

TESLA PATENT 396,121 THERMO-MAGNETIC MOTOR.


SPECIFICATION forming part of Letters Patent No. 396,121, dated January 15, 1889.

Application filed March 30, 1886. Serial No. 197,115. (No model.)


To all whom it may concern:

Be it known that I, NIKOLA TESLA, of Smiljan, Lika, border country of Austria-Hungary, have invented an Improvement in Thermo-Magnetic Motors, of which the following is a specification.

It is well known that heat applied to a magnetized body will lessen the magnetism, and if the temperature is raised sufficiently the magnetism will be neutralized or destroyed.

In my present invention I obtain mechanical power by a reciprocating action resulting from the joint operations of heat, magnetism, and a spring or weight or other force—that is to say, I subject a body magnetized by induction or otherwise to the action of heat until the magnetism is sufficiently neutralized to allow a weight or spring to give motion to the body and lessen the action of the heat, so that the magnetism may be sufficiently restored to move the body in the opposite direction, and again subject the same to the demagnetizing of the heat.

In carrying out my invention I am able to make use of either an electro-magnet or a permanent magnet, and I preferably direct the heat against a body that is magnetized by induction, rather than directly against a permanent magnet, thereby avoiding the loss of magnetism that might result in the permanent magnet by the action of heat. I also provide for lessening the volume of the heat or for intercepting the same during that portion of the reciprocation in which the cooling action takes place.

In the drawings I have represented by diagrams some of the numerous arrangements that may be made use of in carrying out my invention. In all of these figures the magnet-poles are marked N S, the armature A, the Bunsen burner or other source of heat H, the axis of motion M, and the spring or the equivalent thereof—namely, a weight—is marked W.

In Figure 1 the permanent magnet N is connected with a frame, F, supporting the axis M, from which the arm P hangs, and at the lower end of which the armature A is supported. The stops 2 and 3 limit the extent of motion, and the spring W tends to draw the armature A away from the magnet N. It is now to be understood that the magnetism of N is sufficient to overcome the spring W and draw the armature A toward the magnet N. The heat acting upon the armature A neutralizes its induced magnetism sufficiently for the spring W to draw the armature A away from the magnet N and also from the heat at H. The armature now cools and the attraction of the magnet N overcomes the spring W and draws the armature A back again above the burner H, so that the same is again heated and the operations are repeated. The reciprocating movements thus obtained are employed as a source of mechanical power in any desired manner. Usually a connecting-rod to a crank upon a fly-wheel shaft will be made use of, as indicated in Fig. 10; but I do not limit myself in this respect.

Fig. 2 represents the same parts as before described; but an electro-magnet is illustrated in place of a permanent magnet. The operations, however, are the same.

In Fig. 3 I have shown the same parts as in Figs. 1 and 2, only they are differently arranged. The armature A, instead of swinging, is stationary and held by an arm, P’, and the core N S of the electro-magnet is made to swing within the helix Q, the said core being suspended by the arm P from the pivot M. A shield, R, is connected with the magnet-core and swings therewith, so that after the heat has demagnetized the armature A to such an extent that the spring W draws the core N S away from the armature A the shield R comes between the flame H and armature A, thereby intercepting the action of the heat and allowing the armature to cool, so that the magnetism, again preponderating, causes the movement of the core N S toward the armature A and the removal of the shield R from above the flame, so that the heat again acts to lessen or neutralize the magnetism. A rotary or other movement may be obtained from this reciprocation.

Fig. 4 corresponds in every respect with Fig. 3, except that a permanent horseshoe-magnet, N S, is represented as taking the place of the electro-magnet in said Fig. 3.

In Fig. 5 I have shown a helix, Q, with an armature adapted to swing toward or from the helix. In this case there may be a soft-iron core in the helix, or the armature may assume the form of a solenoid-core, there being no permanent core within the helix.

Fig. 6 is an end view, and Fig. 7 a plan view, illustrating my improvement as applied to a swinging armature, A, and a stationary permanent magnet, N S. In this instance I apply the heat to an auxiliary armature or keeper, T, which is adjacent to and preferably in direct contact with the magnet. This armature T, in the form of a plate of sheet-iron, extends across from one pole to the other and is of sufficient section to practically form a keeper for the magnet, so that when this armature T is cool nearly all the lines of force pass over the same and very little free magnetism is exhibited. Then the armature A, which swings freely on the pivots M in front of the poles N S, is very little attracted and the spring s pulls the same away from the poles into the position indicated in the drawings. The heat is directed upon the iron plate T at some distance from the magnet, so as to allow the magnet to be kept comparatively cool. This heat is applied beneath the plate by means of the burners H, and there is a connection from the armature A or its pivot to the gas-cock 6 or other device for regulating the heat. The heat acting upon the middle portion of the plate T, the magnetic conductivity of the heated portion is diminished or destroyed, and a great number of the lines of force are deflected over the armature A, which is now powerfully attracted and drawn into line, or nearly so, with the poles N S. In so doing the cock 6 is nearly closed and the plate T cools, the lines of force are again deflected over the same, the attraction exerted upon the armature A is diminished, and the spring W pulls the same away from the magnet into the position shown by full lines, and the operations are repeated. The arrangement shown in Fig. 6 has the advantages that the magnet and armature are kept cool and the strength of the permanent magnet is better preserved, as the magnetic circuit is constantly closed.

In the plan view, Fig. 8, I have shown a permanent magnet and keeper-plate, T, similar to those in Figs. 6 and 7, with the burners H for the gas beneath the same; but the armature is pivoted at one end to one pole of the magnet and the other end swings toward and from the other pole of the magnet. The spring W acts against a lever-arm that projects from the armature, and the supply of heat has to be partly cut off by a connection to the swinging armature, so as to lessen the heat acting upon the keeper-plate when the armature A has been attracted.

Fig. 9 is similar to Fig. 8, except that the keeper T is not made use of and the armature itself swings into and out of the range of the intense action of the heat from the burner H.

Fig. 10 is a diagram similar to Fig. 1, except that in place of using a spring and stops the armature is shown as connected by a link, 12, to the crank 13 of a fly-wheel, so that the fly-wheel will be revolved as rapidly as the armature can be heated and cooled to the necessary extent. A spring may be used in addition, as in Fig. 1.

In Fig. 11 the two armatures A A are connected by a link, so that one will be heating while the other is cooling, and the attraction exerted to move the cooled armature is availed of to draw away the heated armature instead of using a spring.

I have shown in the drawings several ways of carrying out my invention; but said invention is not limited by any particular form, arrangement, or construction of devices.

I claim as my invention—

1. The combination, with a swinging body under the influence of magnetism, of a burner or other source of heat acting to vary the magnetism, and a spring or other power to move the swinging body in the opposite direction to the action of the magnetism, substantially as set forth.

2. The combination, with two or more armatures connected to each other, of magnets to influence such armatures, and burners or other sources of heat to vary the magnetic action and cause the armatures to move, substantially as set forth.

Signed by me this 29th day of March, 1886.

NIKOLA TESLA.

Witnesses:
GEO. T. PINCKNEY,
WALLACE L. SERRELL.

from http://www.TeslaUniverse.com/nikola-tesla-patents

read about experimental results at
http://citizenscientistsleague.com/2012/03/02/

 


 

Tesla’s lost Inventions

Tesla & Dark Energy (1)

Tesla & Dark Energy (2)

Several Magnetic Motors

Ed Gray’s Magnetic Motor

5 Comments

  1. When is someone who is “into” Nikola Tesla … going to Create a city with Future*, using nothing but ( Green Earth ) Technology ( hint ) Nikola Tesla… Home, Transportation ( VTOL and linear,), Large,medium,small, and toys for the prodigal son and daughter to learn the “way of life”… Power distribution, or living “off-grid” with zero liabilities, and more focus on Free Electricity, and Water fuel cells or using SEG.

    Thanks,


    maybe when the Age of Aquarius arrives
    -ed

  2. Is there a book of all Tesla’s inventions that i could buy or how would I go about obtaining his inventions and putting them to use for all the peaple of the world. In Gods name thank you


    Do a google search on “best Nikola Tesla books” -ed

  3. Dear Host:

    I just wanted to say thank you for all the information you maintain! You have instilled an appreciation for Tesla as well as given me several solutions, by way of researching your site, to solve some issues with devices of my own. Although, I will NOT be seeking patents, nor will you see me on the news, I will most definately, and quietly be improving the quality of our lives. Thank you!


    You are welcome, and Thank you.
    -ed

  4. Veljko Ilic says:
    May 16, 2010 at 3:01 am
    Where in Colorado is Project Tesla being conducted?

    Actually, the project was completed 1995. It is called the New Denver Airport. Google it, you will find the information, and confirmation on nearly every site.
    Cheers!


    That’s a great joke. Thanks for the laugh.
    . . . yeah, the airport was completed in 1995.
    -ed

  5. Where in Colorado is Project Tesla being conducted?

    It was proposed as a 4 year project from 1989 to 1993, in Colorado Springs, but no new information came out of the project. -editor

Comments are closed